The specification for our entry-level affordable collection product, Arcuato, is shown below. For further information about specific products in either the affordable range or designer collection, please contact our sales team sales@chamois.co.uk for assistance.
- 18mm cabinet panels constructed from 100% recycled timber panels
- Structural performance to BS6222 Part 2, Grade H
- 18mm carcasses fully assembled on adjustable legs (adjustable leg ratio from 90-160mm with oval leg socket attached to base of unit, providing extra end-panel support)
- Base units 870mm high x 600mm or 500mm deep with one internal shelf
- Wall units choice of 570, 720 or 900mm high x 340mm deep with internal shelving on plastic, anti-tilt shelf clips
- Carcass, side panel, plinth, finish, colour: 18mm melamine-faced chipboard to meet BS EN 312-P2 with cam and dowel construction. All exposed edges lipped with 1mm ABS, machine-applied with hot melt adhesive to prevent moisture ingress to BS7331
- Knock-in plastic worktop fixing brackets
- Drawer box and hinge to meet BS6222 Part 2, Level H (lifetime guarantee)
- Base unit backs offset by 65mm to allow for services - removable option available
- 120-degree child-proof hinges
- Surface finishes performance to BS6222 Part 3
|
- FIRA-approved drawer assembly, to meet
BS6222 Level H. Three-side enamel-coated
with 15mm chipboard base. Drawer front can
be adjusted horizontally and vertically
- Runner system includes metal bearings,
enamel-coated parallel guides with built-in
drawer stop and self-closing action
- Worktop classification to BS6222 Part 3, Type 2
- Bull-nosed front edge to meet FIRA Gold
Award standard. 40mm chipboard worktop
core to BS EN-312-3 (P3) faced, with high-pressure
laminate to BS EN438 using moisture-resistant bonding adhesive. Front and rear edges sealed by wax injection
- Optional Blumotion pneumatic soft-closing
system for doors and drawers
- All steel fittings to be zinc/nickel plated
and from a recycled source
- Selection of six options for handles
- Selection of six colour choices for frontages
- Cabsave aluminium tray factory fitted to sink
base unit, affording protection from water
ingress in the event of any plumbing fitting leaks.
- Door, drawer finish, colour to BS6222 Level H
and 18mm thick foil-wrapped chipboard. Exposed
edges lipped with 3mm minimum ABS edge lipping,
bonded with machine-applied hot melt adhesive
to prevent moisture penetration to BS7331
|
